B58 Gen1 Flex Fuel ECA Kit

Now that Gen1 B58 tuning software supports true CAN-based Flex Fuel tuning, we are offering our own plug and play ECA solution! With MHD and BM3’s new features, there is no longer much of a need for Bluetooth ethanol sensors. A CAN-based ethanol sensor, can not only monitor ethanol content, but it will also directly communicate with the DME for full Flex Fuel operation! With a Flex Fuel tune, the DME will automatically adjust the tune from a high-powered E85 map, all the way to a pump gas map, and everything in between. This all happens on the fly, based on the live CAN-communication with our ethanol sensor. Gone are the days of doing math at the gas pump only to decide which map to flash and how many gallons of ethanol to mix!

ZERO cutting and ZERO wire-taps! This kit is fully reversible and truly plug and play. The wiring integrates into the OEM harness and hoses and sensor tuck seamlessly to allow for reinstallation of all OEM sound insulation foam and engine covers. With the ethanol sensor mounting location as close to the injectors as possible, there is virtually zero lag time on the exact ethanol mixture truly entering the combustion chamber.

Don’t be fooled by our extensive and overly detailed, DIY-friendly instruction manual! You can expect this kit to add about 30 minutes to a traditional HPFP install or to take about 1 hour on it’s own, depending on skill-level.

Kit Contents:

• Zeitronix ECA-CAN Module

• Custom PTFE Hose Set

• Dorch Plug-n-Play ECA Harness

• Genuine Continental Ethanol Sensor

• Pre-cut Firewall Grommet

• Mounting Accessories

Kit Fitment:

F20/21 – 140i, 140xi
F22/23 – 240i, 240xi
F30/31/34 – 340i, 340xi
F32/33/36 – 440i, 440xi

G30/31 – 540i, 540xi 
G32 – 640i, 640xi
G11/12 – 740i, 740xi *

G01 – X3 m40i
G02 – X4 m40i

* ONLY UP TO 2019 Model Year
KIT NOT COMPATIBLE with 2020+ B58 Vehicles