



































bootmod3 N63T3 - BMW G-series M550 750i M850i X5M50i X6M50i X7M50i Tune
Build the ultimate tune for your N63T3 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.
Stage 1 ACN91 octane: up to 16%HP / 11% TQ
Stage 1 91 octane : up to 20% HP / 12% TQ
Stage 1 93 octane: up to 23% HP / 12% TQ
Stage 1 E30 octane: up to 40% HP / 23% TQ
Stage 2 ACN91 octane: up to 20%HP / 16% TQ
Stage 2 91 octane: up to 22% HP / 18% TQ
Stage 2 93 octane: up to 26% HP / 18% TQ
Stage 2 E30 octane: up to 45% HP / 25% TQ
Stage 2 Race Gas: up to 45% HP / 25% TQ
Stage 2 AGG (Aggressive burble) versions of maps also available.
Some of the map features provided:
Map Customization through Map Editor
- Top speed limiter removal
- Higher rev limiter
- Recalibrated Sport Gauges on iDrive
- Cold start cat heat cycle and cat efficiency check removed (for off-road use)
- Maps for upgraded turbos
- Custom Throttle mapping
- E30 and Race Gas tuning
N63T3 engine vehicles supported (if your N63T3 vehicle is not listed please inquire with us):
- 2020+ G30 M550
- 2019+ G11/G12 750i
- 2019+ G14/G15/G16 M850i
- 2019+ G05 X5 M50i
- 2019+ G06 X6 M50i
- 2019+ G06 X7 M50i
*** BM3 WiFi Adapter or OBD ENET cable required, available separately
*** Vehicles who have been purchased at BMW after July 2020 will likely require a DME unlock. To enable OBD flashing schedule your Bench Unlock with us today all models from 2014-2020 can be Unlocked same day in NYC/NJ/CT text 914-709-5250 or Central FL 407-984-6813 ***
Please note: Order cancellations due to the vehicle's DME being locked will be subject to a 5% non-refundable merchant fee.
*** Vehicles produced after 07.2020 are not tunable via OBD without a Femto unlock. If you have a vehicle produced after July 2020 please reach out to us first!
Build the ultimate tune for your N63T3 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.
Stage 1 ACN91 octane: up to 16%HP / 11% TQ
Stage 1 91 octane : up to 20% HP / 12% TQ
Stage 1 93 octane: up to 23% HP / 12% TQ
Stage 1 E30 octane: up to 40% HP / 23% TQ
Stage 2 ACN91 octane: up to 20%HP / 16% TQ
Stage 2 91 octane: up to 22% HP / 18% TQ
Stage 2 93 octane: up to 26% HP / 18% TQ
Stage 2 E30 octane: up to 45% HP / 25% TQ
Stage 2 Race Gas: up to 45% HP / 25% TQ
Stage 2 AGG (Aggressive burble) versions of maps also available.
Some of the map features provided:
Map Customization through Map Editor
- Top speed limiter removal
- Higher rev limiter
- Recalibrated Sport Gauges on iDrive
- Cold start cat heat cycle and cat efficiency check removed (for off-road use)
- Maps for upgraded turbos
- Custom Throttle mapping
- E30 and Race Gas tuning
N63T3 engine vehicles supported (if your N63T3 vehicle is not listed please inquire with us):
- 2020+ G30 M550
- 2019+ G11/G12 750i
- 2019+ G14/G15/G16 M850i
- 2019+ G05 X5 M50i
- 2019+ G06 X6 M50i
- 2019+ G06 X7 M50i
*** BM3 WiFi Adapter or OBD ENET cable required, available separately
*** Vehicles who have been purchased at BMW after July 2020 will likely require a DME unlock. To enable OBD flashing schedule your Bench Unlock with us today all models from 2014-2020 can be Unlocked same day in NYC/NJ/CT text 914-709-5250 or Central FL 407-984-6813 ***
Please note: Order cancellations due to the vehicle's DME being locked will be subject to a 5% non-refundable merchant fee.
*** Vehicles produced after 07.2020 are not tunable via OBD without a Femto unlock. If you have a vehicle produced after July 2020 please reach out to us first!
Do not activate license if you do not intend to get a Bench Unlock or Femto Unlock this saves both you (customer) and us time. All 2020+ models require a Bench Unlock and all 2021+ require a Femto Unlock. There’s a chance pre 2020 will require Bench Unlock if the software was updated as well. Contact us before purchasing a license if any questions.