BOOTMOD3 N20 N26 - BMW F10 F20 F21 F22 F30 F32 125I 220I 228I 320I 328I 420I 428I 520I 528I X3 X4 TUNE
Build the ultimate tune for your N20 / N26 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.
N20 (low-compression 28i)
Stage 1 91 octane: 16%HP / 20%TQ
Stage 1 93 octane: 18%HP / 22%TQ
Stage 2 91 octane: 20%HP / 24%TQ
Stage 2 93 octane: 22%HP / 25%TQ
Stage 1 E30 octane: 21%HP / 24%TQ
Stage 2 E30 octane: 25%HP / 27%TQ
Stage 2 AGG (Aggressive burble) versions of maps also available.
N20 (PWG 20i)
Stage 1 91 octane: up to 24%HP / up to 38%TQ
Stage 1 93 octane: up to 26%HP / up to 38%TQ
Stage 2 91 octane: up to 28%HP / up to 42%TQ
Stage 2 93 octane: up to 30%HP / up to 42%TQ
Stage 2 E30 octane: up to 33%HP / up to 45%TQ
Stage 2 racegas: up to 33%HP / 45%TQ
Stage 2 AGG (Aggressive burble) versions of maps also available.
N20 (EWG 20i)
Stage 1 91 octane: 48%HP / 54%TQ
Stage 1 93 octane: 52%HP / 56%TQ
Stage 2 91 octane: 54%HP / 58%TQ
Stage 2 93 octane: 56%HP / 60%TQ
Stage 2 AGG (Aggressive burble) versions of maps also available.
N20 engine BMW Vehicles supported (if your N20 vehicle is not listed please inquire with us):
2012–2017 F20 125i
2014–2016 F22 220i/228i
2012–2015 F30 320i/328i
2013–2016 F34 320i GT/ 328i GT
2014–2016 F32 420i/428i
2011–2016 F10 520i/525Li/528i
2013-2017 F25 X3 sDrive18i/xDrive20i
2014–2017 F26 X4 xDrive20i
For more info take a look at the FAQ here!
*** Vehicles who have been purchased at BMW after July 2020 will likely require a DME unlock. To enable OBD flashing schedule your Bench Unlock with us today all models from 2014-2020 can be Unlocked same day in NYC/NJ/CT text 914-709-5250 | 914-279-0991 or Central FL (407) 984-6813 ***
Please note: bootmod3 will not work on your vehicle if your DME is locked. Order cancellations due to the vehicle's DME being locked will be subject to a 5% nonrefundable merchant fee.
*** Vehicles produced after 07.2020 are not tunable via OBD without a Femto unlock. If you have a vehicle produced after July 2020 please reach out to us first!
VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER
Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.
Build the ultimate tune for your N20 / N26 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.
N20 (low-compression 28i)
Stage 1 91 octane: 16%HP / 20%TQ
Stage 1 93 octane: 18%HP / 22%TQ
Stage 2 91 octane: 20%HP / 24%TQ
Stage 2 93 octane: 22%HP / 25%TQ
Stage 1 E30 octane: 21%HP / 24%TQ
Stage 2 E30 octane: 25%HP / 27%TQ
Stage 2 AGG (Aggressive burble) versions of maps also available.
N20 (PWG 20i)
Stage 1 91 octane: up to 24%HP / up to 38%TQ
Stage 1 93 octane: up to 26%HP / up to 38%TQ
Stage 2 91 octane: up to 28%HP / up to 42%TQ
Stage 2 93 octane: up to 30%HP / up to 42%TQ
Stage 2 E30 octane: up to 33%HP / up to 45%TQ
Stage 2 racegas: up to 33%HP / 45%TQ
Stage 2 AGG (Aggressive burble) versions of maps also available.
N20 (EWG 20i)
Stage 1 91 octane: 48%HP / 54%TQ
Stage 1 93 octane: 52%HP / 56%TQ
Stage 2 91 octane: 54%HP / 58%TQ
Stage 2 93 octane: 56%HP / 60%TQ
Stage 2 AGG (Aggressive burble) versions of maps also available.
N20 engine BMW Vehicles supported (if your N20 vehicle is not listed please inquire with us):
2012–2017 F20 125i
2014–2016 F22 220i/228i
2012–2015 F30 320i/328i
2013–2016 F34 320i GT/ 328i GT
2014–2016 F32 420i/428i
2011–2016 F10 520i/525Li/528i
2013-2017 F25 X3 sDrive18i/xDrive20i
2014–2017 F26 X4 xDrive20i
For more info take a look at the FAQ here!
*** Vehicles who have been purchased at BMW after July 2020 will likely require a DME unlock. To enable OBD flashing schedule your Bench Unlock with us today all models from 2014-2020 can be Unlocked same day in NYC/NJ/CT text 914-709-5250 | 914-279-0991 or Central FL (407) 984-6813 ***
Please note: bootmod3 will not work on your vehicle if your DME is locked. Order cancellations due to the vehicle's DME being locked will be subject to a 5% nonrefundable merchant fee.
*** Vehicles produced after 07.2020 are not tunable via OBD without a Femto unlock. If you have a vehicle produced after July 2020 please reach out to us first!
VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER
Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.
Build the ultimate tune for your N20 / N26 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.
N20 (low-compression 28i)
Stage 1 91 octane: 16%HP / 20%TQ
Stage 1 93 octane: 18%HP / 22%TQ
Stage 2 91 octane: 20%HP / 24%TQ
Stage 2 93 octane: 22%HP / 25%TQ
Stage 1 E30 octane: 21%HP / 24%TQ
Stage 2 E30 octane: 25%HP / 27%TQ
Stage 2 AGG (Aggressive burble) versions of maps also available.
N20 (PWG 20i)
Stage 1 91 octane: up to 24%HP / up to 38%TQ
Stage 1 93 octane: up to 26%HP / up to 38%TQ
Stage 2 91 octane: up to 28%HP / up to 42%TQ
Stage 2 93 octane: up to 30%HP / up to 42%TQ
Stage 2 E30 octane: up to 33%HP / up to 45%TQ
Stage 2 racegas: up to 33%HP / 45%TQ
Stage 2 AGG (Aggressive burble) versions of maps also available.
N20 (EWG 20i)
Stage 1 91 octane: 48%HP / 54%TQ
Stage 1 93 octane: 52%HP / 56%TQ
Stage 2 91 octane: 54%HP / 58%TQ
Stage 2 93 octane: 56%HP / 60%TQ
Stage 2 AGG (Aggressive burble) versions of maps also available.
N20 engine BMW Vehicles supported (if your N20 vehicle is not listed please inquire with us):
2012–2017 F20 125i
2014–2016 F22 220i/228i
2012–2015 F30 320i/328i
2013–2016 F34 320i GT/ 328i GT
2014–2016 F32 420i/428i
2011–2016 F10 520i/525Li/528i
2013-2017 F25 X3 sDrive18i/xDrive20i
2014–2017 F26 X4 xDrive20i
For more info take a look at the FAQ here!
*** Vehicles who have been purchased at BMW after July 2020 will likely require a DME unlock. To enable OBD flashing schedule your Bench Unlock with us today all models from 2014-2020 can be Unlocked same day in NYC/NJ/CT text 914-709-5250 | 914-279-0991 or Central FL (407) 984-6813 ***
Please note: bootmod3 will not work on your vehicle if your DME is locked. Order cancellations due to the vehicle's DME being locked will be subject to a 5% nonrefundable merchant fee.
*** Vehicles produced after 07.2020 are not tunable via OBD without a Femto unlock. If you have a vehicle produced after July 2020 please reach out to us first!
VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER
Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.
@BM3TUNING
bootmod3 app and cloud services offer many unique features not found in any other flash tune including and currently available:
Mobile app (iOS and Android) and Web (http://www.bootmod3.net) including Windows and macOS support
One OTS map/tune included with the purchase and any other maps labeled as "FREE"
Datalogging hundreds of diagnostic channels, up to 70+ channels concurrently with the highest throughput and sample rates available
Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser
Cloud-based storage for map data and datalogs
Ability to log any internal RAM variable values with a number of preset ones available
Reverting back to stock performance map and re-locking the DME to stock programming
Live Dash - realtime vehicle parameter monitoring via in-app gauges
Diagnostics
Read and clear trouble codes in all vehicle modules
Reset learned adaptations (octane, knock, Valvetronic, etc)
ECU power reset
(Optional) Off the shelf (OTS) tunes for 91/93/Race gas/E85 octane (SEE HERE)
(Optional) Custom tuning available through tuners in the bootmod3 Tuner Directory. bootmod3 contains a full map editor so you can tune your car yourself or with your local tuner of choice as well.
Some of the OTS and possible aftermarket turbo upgrade custom map features provided by the bootmod3 platform :
Map Customization through Map Editor
Exhaust Burble adjustments on any map (OTS & Custom)
GTS Startup Roar
Max Cooling Mode
Cold start (cat heating on startup) removal for quieter cold start
Cat efficiency check (CEL) removal for de-cat downpipes (for off-road use)
Exhaust Flap Adjustments (Sport Mode)
Top Speed Limiter Removal
Electronic Wastegate (EWG) Disable
Exhaust OPF/PPF/GPF Removal
Boost By Gear % Reduction
Re-calibrated Sport Gauges on iDrive
Maps for upgraded turbos
E85/blend, RaceGas, and Meth Injection Tuning
Custom Throttle Mapping
Backend Flash Maps for Piggyback Use
VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER
Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.