{"title":"Bootmod3 Hardware","description":"","products":[{"product_id":"rev2","title":"REV2 Controller - Powered by bootmod3 DirectPWM and FlexRay™","description":"\u003cp\u003e\u003cstrong\u003eREV2 Controller\u003c\/strong\u003e - The most advanced and industry first\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFlexRay\u003c\/strong\u003e\u003cstrong\u003e™\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDirectPWM\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emotorsport ECU featuring an IP66 waterproof enclosure and a Mil-Spec motorsport-grade wiring harness.\u003c\/p\u003e\n\u003cp\u003eWith the idea and work originating as far back as 2019, all the while juggling countless other development efforts on new features released since then such as CustomROM, new Map Editor, Flex Fuel Kits, WiFi Adapter, support for other engine types and vehicles, this incredible hardware\/software interfacing project is finally here, and we can't be more excited have you use it!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eOnce installed in a vehicle, REV2 Controller integrates with the DME using the incredibly fast and robust\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFlexRay\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e™ \u003c\/span\u003e\u003c\/strong\u003eprotocol. In addition, bootmod3 CustomROM V2 goes a step further and implements a highly innovative PWM control strategy,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDirectPWM\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is FlexRay\u003c\/strong\u003e\u003cstrong\u003e™?\u003cbr\u003e\u003c\/strong\u003e\u003cspan data-huuid=\"8353027819596365745\" class=\"oXzekf\"\u003e\u003cspan\u003eFlexRay\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-huuid=\"8353027819596365745\" class=\"oXzekf\"\u003e\u003cspan\u003e™ is a high-speed communication protocol used in vehicles and aircraft.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan data-huuid=\"8353027819596364240\" class=\"oXzekf\"\u003e\u003cspan\u003eIt's designed to be reliable, fault-tolerant, and efficient. Its used in safety-critical applications, \u003c\/span\u003e\u003c\/span\u003e\u003cspan data-huuid=\"8353027819596364240\" class=\"oXzekf\"\u003e\u003cspan\u003eadvanced driver assistance systems, power train, body control modules, battery management systems, and more. Over the past decade, vehicle manufacturers have transitioned away from CANBUS on modern vehicles for many in-vehicle control systems and REV2 Controller has followed that trend.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is DirectPWM?\u003c\/strong\u003e\u003cbr\u003ebootmod3 CustomROM V2 software update implements DirectPWM to re-purpose an existing DME pin output and uses it to send a PWM signal directly through the OEM factory vehicle harness to a REV2 input. REV2 in turn replicates that PWM signal to one of its outputs. With no communication protocol overhead involved, DirectPWM provides for the absolute fastest, most direct control of a REV2 connected output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich outputs can use DirectPWM, and how is this configured?\u003c\/strong\u003e\u003cbr\u003eSequential Port Injection and Boost Control Solenoid (MAC valve) are configurable with DirectPWM trigger control. Tuners and end users simply toggle it on the bootmod3 Map Configuration screen and store it on the DME. Integration is seamless and no configuration\/updates are required to the REV2 Controller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnce my REV2 is installed in the vehicle, do I need to connect it for any tuning like with some standalone ECUs?\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eNo. You simply install the REV2 and forget about it :) All your tuning is still done on the DME using the bootmod3 Map Editor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHow do I update firmware on the REV2?\u003cbr\u003e\u003c\/strong\u003eAlthough firmware updates are a very rare occurrence since REV2 contains no state or tuning data, for the odd occasion we may have a firmware bug, REV2 Controller integrates \u003cstrong\u003eWiFi\u003c\/strong\u003e. Any firmware updates would be done simply through the bootmod3 app like with our bootmod3 WiFi Adapter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong question, geeks only! :) FlexRay\u003c\/strong\u003e\u003cstrong\u003e™ has options for communicating using a dynamic and a static segment. Static segment is much harder to implement and its the one that ensures message delivery making it highly desirable over a lossy\/broadcast type protocol such as CANBUS that which ensure message delivery. Tell me you implemented support FlexRay's static segment?\u003c\/strong\u003e\u003cbr\u003eYou bet we did! DME CustomROM V2 and REV2 utilize the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003estatic segment on FlexRay to guarantee message delivery\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor output control communications.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDoes REV2 Controller implement an Ethanol Content Analyzer and send ethanol content and fuel temperature to the DME?\u003c\/strong\u003e\u003cbr\u003eREV2 provides a digital input on its harness for an Ethanol Sensor. However, unlike with our \u003ca href=\"https:\/\/www.protuningfreaks.com\/products\/bm3-flexfuel-kit-canbus-enabled-and-100-plug-n-play?srsltid=AfmBOor3E8CZAWQoNw2jRoLvnPs5kDrL0Vnd5H7XsQu5oKaL3rZg0xsI\"\u003ebootmod3 Flex Fuel Kit Controller\u003c\/a\u003e, REV2 does not do any ethanol content analysis in its firmware. As with all sensors connected to REV2 inputs, REV2 also sends raw frequency\/PWM data from the ethanol sensor to the DME without any processing of it in the firmware. DME then analyzes that raw sensor data and converts it into ethanol content and fuel temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes REV2 a built in MAP sensor, or have an input for a MAP sensor?\u003cbr\u003e\u003c\/strong\u003eREV2 doesn't have a built-in MAP sensor or an input for an aftermarket MAP sensor. Instead, we provide a separate plug'n'play harness which connects an aftermarket MAP sensor directly to the OEM vehicle harness. Aftermarket MAP sensor is then calibrated in custom tables stored on the DME.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes REV2 and bootmod3 CustomROM V2 provide any safeties for connected inputs and outputs?\u003c\/strong\u003e\u003cbr\u003eREV2 simply relays connected sensor data to the DME. bootmod3 CustomROM V2 functionality on the DME takes in that data to provide a tuner to configure over 40 custom trouble codes for various integrated safeties such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIgnition Coil Cut Safety, per cylinder\u003c\/li\u003e\n\u003cli\u003eDirect Injector Cut Safety, per cylinder\u003c\/li\u003e\n\u003cli\u003ePort Fuel Injector Cut Safety, per cylinder\u003c\/li\u003e\n\u003cli\u003eCoolant Over-Pressure Safety (e.g. due to a leaking head gasket)\u003c\/li\u003e\n\u003cli\u003eFuel Pressure Safety\u003c\/li\u003e\n\u003cli\u003eVarious engine status safeties for: Cam Sync, Board Status, FlexRay connectivity\u003c\/li\u003e\n\u003cli\u003eOver-boost Safety for Boost Control PID\u003c\/li\u003e\n\u003cli\u003eKnock Safety based on Ignition Timing Corrections, per cylinder\u003c\/li\u003e\n\u003cli\u003eCustom Load and Torque Limiter Safeties\u003c\/li\u003e\n\u003cli\u003eVarious Nitrous Safeties such as\n\u003cul\u003e\n\u003cli\u003eBottle under\/over pressure\u003c\/li\u003e\n\u003cli\u003eLean run timer\u003c\/li\u003e\n\u003cli\u003ePre\/Post spray timer with Ignition Timing and Lambda Target compensations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMethanol \/ Water Tank Level Safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bootmod3 or CustomROM to use the REV2 Controller on my car?\u003cbr\u003e\u003c\/strong\u003eREV2 Controller is not a standalone ECU and as such does not have any calibration table data. All tuning and features are done on the DME. DME must be running the bootmod3 CustomROM V2 software update to use the REV2 Controller on your vehicle.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to re-send my DME to Femto for unlock again if I already unlocked it before?\u003cbr\u003e\u003c\/strong\u003eIf your vehicle's DME required a Femto unlock and you've already done it, unfortunately due to how Femto's unlock works, you'll have to re-send it for Femto to load the bootmod3 CustomROM V2 update on your DME. Those re-sending DMEs for updates get adjusted lower pricing, but for all DME unlock details get in touch with Femto.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy vehicle's DME doesn't require a Femto unlock. I can directly and fully flash it over OBD or after a bench unlock. Can I just flash the required bootmod3 CustomROM V2 map from my tuner on the DME?\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eYes, flash away!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREV2 Controller\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehas the following sensor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003einputs\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(sensors not included):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFuel Pressure Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCoolant Pressure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEthanol Content Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNitrous Bottle Pressure Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 Exhaust Gas Temperature Sensors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTurbine Speed Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLaser Ride Height Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMethanol Flow Sensor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMethanol Tank Level Sensor\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eREV2 Controller\u003c\/strong\u003e has the following \u003cstrong\u003eoutputs\u003c\/strong\u003e (hardware such as injectors, solenoids and pumps not included):\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSequential Port Fuel Injection (PI) for up to 8 high impedance injectors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eBoost Control support for a pneumatic boost solenoid (MAC valve)\u003c\/li\u003e\n\u003cli\u003eNitrous Solenoid\u003c\/li\u003e\n\u003cli\u003eMethanol \/ Water Injection using \u003cspan\u003e2 independent outputs\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMeth\/water pump\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMeth\/water solenoid\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSecondary Fuel Pumps (brushed \/ brushless)\u003c\/li\u003e\n\u003cli\u003eLine Lock, full integration with the brake pedal and OEM steering wheel controls requiring no additional aftermarket switches in the car\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNOTE\u003c\/strong\u003e: Given the number of tables in the nitrous window setup, a custom tuner can get very creative in using the nitrous control strategy which allows for ignition and fuel changes to do the same for methanol injection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cstrong\u003eREV2 Controller\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003ebase package\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eincludes everything needed to get started:\u003c\/div\u003e\n\u003cul data-stringify-type=\"unordered-list\" data-list-tree=\"true\" class=\"p-rich_text_list p-rich_text_list__bullet p-rich_text_list--nested\" data-indent=\"0\" data-border=\"0\"\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003eREV2 Board\u003c\/li\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003eREV2 IP66 Polycarbonate Enclosure and Mounting Bracket\u003c\/li\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003eREV2 Main Mil-Spec Race Harness\u003c\/li\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003eREV2 Flex Fuel Sensor Sub-harness (no sensor provided)\u003c\/li\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003eREV2 Pressure Sub-harness (optionally provided fuel pressure sensor at extra cost)\u003c\/li\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003ebootmod3 Plug'n'Play MAP sensor harness for OEM TMAP (intake manifold) sensor for use with the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eincluded 100psi (7 BAR) MAP sensor \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan aria-label=\"\" class=\"c-mrkdwn__br\" data-stringify-type=\"paragraph-break\"\u003e\u003c\/span\u003eWe suggest adding the following sensor from the options:\u003c\/div\u003e\n\u003cul data-stringify-type=\"unordered-list\" data-list-tree=\"true\" class=\"p-rich_text_list p-rich_text_list__bullet p-rich_text_list--nested\" data-indent=\"0\" data-border=\"0\"\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003e\n\u003cstrong\u003e150 PSI (10 BAR)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003epressure sensor (absolute pressure) for\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003efuel pressure on your Port Injection feed line.\u003c\/li\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003e\u003cstrong\u003eHIGHLY RECOMMENDED: Port injection fuel injectors from reputable brands such as\u003cspan\u003e \u003c\/span\u003eInjector Dynamics\u003cspan\u003e \u003c\/span\u003eor similar that publish injector flow and latency specifications.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003e\u003cstrong\u003eFor those using the STOCK Intake Manifold, instead of drilling\/tapping your plastic intake manifold, use the plug and play Boost Take-Off fitting to install your 7bar MAP sensor, available \u003ca href=\"https:\/\/www.protuningfreaks.com\/collections\/bootmod3-menu\/products\/rev2-controller-map-sensor-boost-take-off-fitting-for-bmw-b58-s58-vehicles\"\u003eread more details here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003e\u003cstrong\u003eFor those pushing very high boost, consider adding in our Coolant Sensor Pressure Kit to monitor coolant system pressure for additional integrated fail-safety, available \u003ca href=\"https:\/\/www.protuningfreaks.com\/collections\/bootmod3-menu\/products\/rev2-coolant-pressure-sensor-kit\"\u003eread more details here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan aria-label=\"\" class=\"c-mrkdwn__br\" data-stringify-type=\"paragraph-break\"\u003e\u003c\/span\u003eFor flex fuel support, if you're not already running a flex fuel kit on your vehicle and plan on running with ethanol (E85), we recommend our standard High Flow bootmod3 flex fuel kit. For those that don't mind losing some flow capacity in their DI fuel system we also have the option of going with the more economical kit that uses PR 360 fittings. This contains everything from our bootmod3 Flex Fuel Kit that is required for use with the REV2 as well as the ethanol sensor (exception being the wiring and the flex fuel kit's controller):\u003c\/div\u003e\n\u003cul data-stringify-type=\"unordered-list\" data-list-tree=\"true\" class=\"p-rich_text_list p-rich_text_list__bullet p-rich_text_list--nested\" data-indent=\"0\" data-border=\"0\"\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003e\n\u003cstrong\u003eHigh-Flow\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(includes flex sensor bypass) bootmod3 Engine-Bay Flex Fuel Kit, or,\u003c\/li\u003e\n\u003cli data-stringify-indent=\"0\" data-stringify-border=\"0\"\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(no flex sensor bypass) Kit with PR machined 360 Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan aria-label=\"\" class=\"c-mrkdwn__br\" data-stringify-type=\"paragraph-break\"\u003e\u003c\/span\u003e\u003cstrong\u003eSuggestion\u003c\/strong\u003e: Replace the OEM charge pipe MAP sensor with a 5 BAR OEM Bosch\/BMW MAP sensor.\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e\n\u003cspan\u003e \u003cstrong\u003eREV2 Controller Requirements:\u003cbr\u003e\u003c\/strong\u003e- bootmod3 CustomROM V2 is a MUST! Contact support@protuningfreaks.com if you're unsure what software your vehicle's DME is running\u003cbr\u003e- Cloned (fully programmable) DME, or, FEMTO unlocked specifically for bootmod3 CustomROM V2\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eCURRENT VEHICLE SUPPORT:\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e- All S58 engine vehicles\u003c\/div\u003e\n\u003cdiv class=\"p-rich_text_section\"\u003e- All GEN2 B58 engine vehicles \u003c\/div\u003e","brand":"BOOTMOD3 TUNING USA","offers":[{"title":"S58 \/ GEN2 B58 \/ Include High-Flow Flex Fuel Kit \/ Include 10bar Fuel Pressure Sensor","offer_id":45451206721709,"sku":"REV2+HighFlow-10Bar","price":2195.0,"currency_code":"USD","in_stock":true},{"title":"S58 \/ GEN2 B58 \/ Include High-Flow Flex Fuel Kit \/ Exclude","offer_id":45451206754477,"sku":"HighFlow-No10Bar","price":2095.0,"currency_code":"USD","in_stock":true},{"title":"S58 \/ GEN2 B58 \/ Include PR 360 Fittings Flex Fuel Kit \/ Include 10bar Fuel Pressure Sensor","offer_id":45451206787245,"sku":"PR360+10Bar","price":2095.0,"currency_code":"USD","in_stock":true},{"title":"S58 \/ GEN2 B58 \/ Include PR 360 Fittings Flex Fuel Kit \/ Exclude","offer_id":45451206820013,"sku":"PR360REV2no10bar","price":1995.0,"currency_code":"USD","in_stock":true},{"title":"S58 \/ GEN2 B58 \/ Exclude Flex Fuel Kit Components \/ Include 10bar Fuel Pressure Sensor","offer_id":45451206852781,"sku":"ExcludeFFInclude10bar","price":1799.0,"currency_code":"USD","in_stock":true},{"title":"S58 \/ GEN2 B58 \/ Exclude Flex Fuel Kit Components \/ Exclude","offer_id":45451206885549,"sku":"NOFFno10bar","price":1699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9299\/4989\/files\/REV2Controller-Poweredbybootmod3DirectPWMandFlexRay_5c2d9833-ee0e-4d70-b52f-e34ed57079fb.webp?v=1769304761"},{"product_id":"rev2-coolant-pressure-sensor-kit","title":"REV2 Controller - Coolant Pressure Sensor Kit - For BMW B58 S58 Vehicles","description":"\u003cp style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cstrong\u003eprotuningfreaks Coolant Pressure Sensor Kit – Essential Fail-Safe for High Power BMW B58 \u0026amp; S58 Engines running REV2 Controller and bootmod3 CustomROM V2\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"p3\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eProtect your high-performance \u003cstrong\u003e\u003cspan\u003eB58 and S58 engine\u003c\/span\u003e\u003c\/strong\u003e with the \u003cstrong\u003e\u003cspan\u003eprotuningfreaks Coolant Pressure Sensor Kit\u003c\/span\u003e\u003c\/strong\u003e—the ultimate plug-and-play solution for monitoring coolant pressure and preventing catastrophic failures caused by \u003cstrong\u003e\u003cspan\u003ehead lifting or head gasket issues\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/p\u003e\u003cp class=\"p3\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e⚠️ \u003cstrong\u003e\u003cspan\u003eImportant:\u003c\/span\u003e\u003c\/strong\u003e This kit \u003cstrong\u003e\u003cspan\u003erequires\u003c\/span\u003e\u003c\/strong\u003e \u003cstrong\u003e\u003cspan\u003eREV2\u003c\/span\u003e\u003c\/strong\u003e and \u003cstrong\u003e\u003cspan\u003eCustomROM V2\u003c\/span\u003e\u003c\/strong\u003e for full functionality.\u003c\/p\u003e\u003cp class=\"p1\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp class=\"p3\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e✅ \u003cstrong\u003e\u003cspan\u003eFail-Safe Protection:\u003c\/span\u003e\u003c\/strong\u003e When connected to the \u003cstrong\u003e\u003cspan\u003eREV2 Controller\u003c\/span\u003e\u003c\/strong\u003e, the sensor transmits real-time\u003cstrong\u003e \u003c\/strong\u003e\u003cspan\u003ecoolant pressure sensor voltage data\u003c\/span\u003e over \u003cstrong\u003e\u003cspan\u003eFlexRay\u003c\/span\u003e\u003c\/strong\u003e to the \u003cstrong\u003e\u003cspan\u003eDME\u003c\/span\u003e\u003c\/strong\u003e. Tuners can set a maximum pressure threshold in the DME map to trigger failsafes such as cutting any\/all power adders (boost, nitrous), port injection, di injection—helping prevent severe engine damage.\u003c\/p\u003e\u003cp class=\"p3\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e✅ \u003cstrong\u003e\u003cspan\u003eSeamless Integration:\u003c\/span\u003e\u003c\/strong\u003e Available in two versions to ensure compatibility with your setup.\u003c\/p\u003e\u003cp class=\"p3\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e✅ \u003cstrong\u003e\u003cspan\u003eEasy Installation:\u003c\/span\u003e\u003c\/strong\u003e No cutting or modifications required—our kit connects directly to the \u003cstrong\u003e\u003cspan\u003efactory coolant lines\u003c\/span\u003e\u003c\/strong\u003e making installation quick and hassle-free.\u003c\/p\u003e\u003cp class=\"p3\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e- 6061 Aluminum CNC Coolant Pressure Sensor fitting\u003cbr\u003e- Viton o-ring\u003cbr\u003e- Metal c-clip for factory mounting\u003c\/p\u003e\u003cp class=\"p3\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003e\u003cstrong\u003eOptional:\u003c\/strong\u003e\u003cbr\u003e- 10 bar (150 psi) pressure sensor\u003cbr\u003e- PNP sub-harness for the REV2 \"CP\" input connector\u003c\/p\u003e\u003cp class=\"p3\" style=\"white-space:pre-wrap;\" data-rte-preserve-empty=\"true\"\u003eUpgrade your build with the \u003cstrong\u003e\u003cspan\u003eprotuningfreaks Coolant Pressure Sensor Kit\u003c\/span\u003e\u003c\/strong\u003e and drive with confidence knowing your engine is protected.\u003c\/p\u003e","brand":"BOOTMOD3 TUNING USA","offers":[{"title":"Exclude Sensor \u0026 Harness","offer_id":45680215064749,"sku":"SQ2125859","price":149.0,"currency_code":"USD","in_stock":true},{"title":"Include Sensor \u0026 Harness","offer_id":45680215097517,"sku":"SQ9808843","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9299\/4989\/files\/REV2Controller-CoolantPressureSensorKit-ForBMWB58S58Vehicles.webp?v=1765444236"},{"product_id":"bootmod3-wireless-obd-wifi-flash-adapter","title":"bootmod3 Wireless OBD WiFI Flash Adapter","description":"\u003cp\u003eIntroducing the latest and greatest Wireless connection method for your BMW F and G series vehicles and the 2020+ Toyota Supra, the all new bootmod3 Wireless Adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ebootmod3 WiFi adapter is fully designed in-house by our engineers, built with the highest quality parts and a modern chipset. It achieves perfect reliability and is the quickest adapter currently offered on the market.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003eFeatures:\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFastest\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eflash times over ENET and CANBUS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand consistent connectivity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbility to configure your own WiFi password.\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli\u003eMost if not all other WiFi OBD adapters leave open WiFi access to your OBD port which is a security issue for your vehicle. With bootmod3 you can set\/change to your own custom WiFi password securing access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless ENET\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esupport for BMW F and G series vehicles and 2020+ Toyota Supra\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless CANBUS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSupport\n\u003cul\u003e\n\u003cli\u003eUnlike generic WiFi adapters, our adapter allows full flashing of transmission on GEN2 BMW and 2020+ Toyota Supra removing need for additional WiFi adapters or DCAN cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNO ALARMS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eif left plugged in (BMW G series vehicles and Toyota Supra)\n\u003cul\u003e\n\u003cli\u003eEnters\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eultra\u003c\/strong\u003e \u003cstrong\u003elow power mode\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eif left plugged in consuming just ~20mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOTA updates\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethrough the new bootmod3 app\u003c\/li\u003e\n\u003cli\u003eFirmware fully extensible for additional flash and diagnostic protocols for future connectivity support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual Toggle switch\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto fully power down adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall form factor\u003c\/strong\u003e, considerably smaller than generic WiFi ENET adapters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo VIN locking\u003c\/strong\u003e, can be used on multiple vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eVehicles supported:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAll BMW F and G series vehicles\u003c\/li\u003e\n\u003cli\u003e2014+ Mini\u003c\/li\u003e\n\u003cli\u003e2020+ Toyota Supra (A90 A91)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdditional 3rd Party applications supported:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOEM factory diagnostics such as ISTA and ESYS\u003c\/li\u003e\n\u003cli\u003eXHP App\u003c\/li\u003e\n\u003cli\u003eBimmercode App\u003c\/li\u003e\n\u003cli\u003eBimmerlink App\u003c\/li\u003e\n\u003cli\u003eProTool App\u003c\/li\u003e\n\u003cli\u003e...and other apps requiring ENET and UDS to CANBUS support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen connected on iOS, copy your WiFi settings from Automatic to Manual and leave the Router field empty. This leaves your Mobile data connection active while connected with the vehicle. For additional connectivity information and troubleshooting refer to this\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.protuningfreaks.com\/blogs\/news\/connectivity-with-bootmod3\"\u003eConnectivity Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSome items used and\/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty. \u003c\/strong\u003e\u003c\/p\u003e","brand":"BOOTMOD3 TUNING USA","offers":[{"title":"Default Title","offer_id":45788933652653,"sku":"BM3-WiFiAdapter","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/9299\/4989\/files\/image_2026-03-05_122931416.png?v=1772731773"}],"url":"https:\/\/bootmod3tuning.com\/collections\/bootmod3-hardware.oembed","provider":"BOOTMOD3 TUNING USA","version":"1.0","type":"link"}